Gateway » NV SERIES » NV5931Uv

Gateway » NV SERIES » NV5931Uv LCD Screen Replacement Guide

How to Remove Replace Install your Gateway NV SERIES NV5931Uv Laptop LCD Screen

1. Remove the rubber covers from you Gateway NV5931Uv LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway NV5931Uv Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway NV5931Uv LCD hinges with care as they are delicate.

6. Place the Gateway NV5931Uv LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway NV5931Uv Inverter from the LCD.

8. You are now ready to replace and install your new Gateway NV5931Uv LCD Screen.

9. Recconnect back your Gateway NV5931Uv Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.